FIMIX - Assessment of heterogenity level

PLS is broadly applied in modern business research. This forum is the right place for discussions on the use of PLS in the fields of Marketing, Strategic Management, Information Technology etc.
Post Reply
Leho
PLS Junior User
Posts: 4
Joined: Mon Nov 27, 2017 11:38 am
Real name and title: Holger Leuveld

FIMIX - Assessment of heterogenity level

Post by Leho » Wed Jun 05, 2019 2:41 pm

Dear Forum,

I need a little help in interpreting FIMIX results in conjunction with a multi-group analysis (MGA) that has been done independently from FIMIX. The model is based on a total of 270 evaluable answers.

Based on control considerations, a MGA was already performed which revealed significant differences (significant with p< 0,01 and p <0.05) for four relationships between variables (controls were not considered as they are included as single items in the model). The requirements for a MGA are fulfilled (based on MICOM, step 2, not step 3).

The FIMIX analysis was performed for the model shown below (i.e., including control variables and moderators). The results from the FIMIX analysis are shown below:

My questions to the forum are:
1) Is it correct that it is advisable for a MGA that no control variables are considered as a single indicator?
2) Is it correct that the FIMIX data indicates a solution between 1 and a maximum of 3 segments (independent of the EN value for a 4-segment solution)?
3) Is it correct that there is no significant problem of unobstructed heterogeneity, as the CAIC result indicates one segment and the case numbers for a 2 or 3 segment solution (50 cases for 2 segments; 85 and 32 cases for 3 segments) for further examination is too small. Or would you limit the analysis to the first two segments in the 3-segment solution (with 153 and 85 cases)?
4) I would have expected that the results from the MGA are more or less reflected in the FIMIX analysis. The number of cases for the MGA is 145 (group 1) and 125 (group 2). What explanation could be made that this combination is not apparent?

I would be very happy about your feedback!
Best regards
Holger
Attachments
Model.PNG
Model.PNG (64.34 KiB) Viewed 68 times
FIMIX-Results.PNG
FIMIX-Results.PNG (22.06 KiB) Viewed 68 times

jmbecker
SmartPLS Developer
Posts: 990
Joined: Tue Mar 28, 2006 11:09 am
Real name and title: Dr. Jan-Michael Becker

Re: FIMIX - Assessment of heterogenity level

Post by jmbecker » Thu Jun 06, 2019 8:12 am

Dear Holger,

1) In my opinion, excluding control variables in the MGA is generally a not a good idea. You want to estimate the same model as initially proposed including all controls if they are deemed important. The only exception is the grouping variable itself. If, for example, gender is a control in your original model and you also use it as grouping variable then you need to exclude it in the MGA (because you already control for it by the grouping and it would thus have zero variance in each group).

2) Yes. The EN is by itself usually a bad indicator of the number of segments. AIC3 and CAIC usually indicate the range of meaningful solutions.

3) Well, it depends. I would have a slightly stronger preference for the 1 segment solution, because of the relatively small group sizes of the second and third segment. However, I would still try to investigate if the second and third segment in more detail: Are they plausible (by means of coefficients) and do they relate to some other observable behavior/characteristics? Because you might also have a dataset where you simply under sampled the other segments (maybe these are respondents that are harder to get in a survey, etc.). Thus, you want to understand the segmentation solution before discarding unobserved heterogeneity.
Sometimes the small segments are also outliers or faulty responses, for example, straigthliners or respondents with many missing values that constitute their shared behavior. You might then generally think of excluding these responses from your analysis.

4) Not necessarily. Unobserved heterogeneity might go beyond observed heterogeneity. Thus, the observed grouping might not be optimal and thus the segmentation finds other (more optimal solutions). Your grouping might represent some local optima out of the many different solutions that are possible in grouping the data. However, what you find with FIMIX is also always limited to its assumptions (i.e., multivariate normal response on the endogenous latent variables).
Dr. Jan-Michael Becker, University of Cologne, SmartPLS Developer
Researchgate: https://www.researchgate.net/profile/Ja ... v=hdr_xprf
GoogleScholar: http://scholar.google.de/citations?user ... AAAJ&hl=de

Leho
PLS Junior User
Posts: 4
Joined: Mon Nov 27, 2017 11:38 am
Real name and title: Holger Leuveld

Re: FIMIX - Assessment of heterogenity level

Post by Leho » Thu Jun 06, 2019 11:52 am

Dear Dr. Becker,

Thank you for your friendly and fast response!

Due to my previous (limited) experience with PLS models, I still have the following questions.

1) On the subject of MGA: In various models, I have found that control variables that are configured as a single indicator, more often lead to problems with a MGA. If the prerequisites for a MGA are present in the variables of the main model, can one conclude that an analysis of the main model seems possible, but that no conclusions can be drawn about the relevance of control variables? It would therefore be a limitation of the study, similar to studies that do not use control variables at all. Or would you exclude an MGA due to incomplete fulfillment of the MICOM requirements?

3) On the subject of FIMIX: Is it correct that the results of the FIMIX procedure vary due to methodological issues? If I try to reconstruct the results from the FIMIX procedure, I find differences in the number of possible segments and in segment sizes. Even an exact copy of the path model leads to results that are not comparable to the copied model (the recommendations of Hair et al. 2018 for repetition are followed). Can you explain why the results can be different and how they should be handled in reporting?

4) Related to observed and unobserved heterogenity: Hair et al. 2018, page 177 describes the aim of the FIMIX procedure as follows: "The aim of FIMIX_PLS is to disentangle the overall mixture distribution and estimate parameters (eg the path coefficients) of each group in a regression framework. " Is my interpretation correct, that the FIMIX procedure searches for the optimum of regression coefficients in complete path models (segments) and thus does not necessarily reveal individual, significant differences? In other words, because the goal of the FIMIX procedure is to optimize all regression coefficients in segments, individual differences which can be significant are not necessarily taken into account.

I really appreciate the work in this forum and look forward for feedback!
Best regards
Holger

Post Reply