Hi everybody
I have a PLS-MGA where in one group HTMT ratio is not fulfilled (just by one correlation) and in the other group HTMT ratio is accomplished.
Why does it happen?
How can I justify this correlation (0.882)?
Thanks in advance for your help
PLS-MGA Multigroup HTMT
-
cringle
- SmartPLS Developer
- Posts: 818
- Joined: Tue Sep 20, 2005 9:13 am
- Real name and title: Prof. Dr. Christian M. Ringle
- Location: Hamburg (Germany)
- Contact:
Re: PLS-MGA Multigroup HTMT
Because you use different data to obtain the results of group 1 compared with group 2. Hence, the group-specific results differ.I have a PLS-MGA where in one group HTMT ratio is not fulfilled (just by one correlation) and in the other group HTMT ratio is accomplished. Why does it happen?
Why don't you use the 0.90 cut-off criterion as suggested in this publication: http://link.springer.com/article/10.100 ... 014-0403-8 Then, things should look good.How can I justify this correlation (0.882)?
Best
Christian
Prof. Dr. Christian M. Ringle, Hamburg University of Technology (TUHH), SmartPLS
- Literature on PLS-SEM: https://www.smartpls.com/documentation
- Google Scholar: https://scholar.google.de/citations?use ... AAAJ&hl=de
- Literature on PLS-SEM: https://www.smartpls.com/documentation
- Google Scholar: https://scholar.google.de/citations?use ... AAAJ&hl=de
-
NRECUERO
- PLS Junior User
- Posts: 9
- Joined: Tue Apr 14, 2015 8:43 am
- Real name and title: nuria recuero virto. PhD
Re: PLS-MGA Multigroup HTMT
Thank you very much Mr Ringle!