I have two questions in regard to interpreting path coefficients from bootstrapping. This is mainly interpreting the Original Sample (O), as I'm assuming that the Sample Mean (M) does not need to be interpreted, correct?
1. Is the path coefficient, Original Sample (O), interpreted as expressing the size of a relationship between two latent constructs (e.g., X has the largest, positive relationship with Y [O = 0.45; SD = 0.11]) or the size of the effect between two latent constructs (e.g., X has the largest, positive indirect effect on Y [O = 0.45; SD = 0.11])?
2. Would you mind providing a reputable citation for interpreting the Original Sample (O) path coefficient, rather than the Sample Mean (M) path coefficient, if it would be needed/helpful to do so?
Thank you.
Interpreting Path Coefficients
-
- SmartPLS Developer
- Posts: 1284
- Joined: Tue Mar 28, 2006 11:09 am
- Real name and title: Dr. Jan-Michael Becker
Re: Interpreting Path Coefficients
The original sample coefficient is the one that you would also get from your normal PLS analysis and is the one that is estimated based on the sample provided. You should interpret this coefficient --> correct.
The sample mean in bootstrapping is the average coefficient over all bootstrapping runs. It indicates wether there exists some bias between original sample coefficient and sampling distribution. If the bias is large it is better to use bias-corrected confidence intervals for assessing the significance of the relationship.
The PLS-SEM book would be a possible reference: https://www.smartpls.com/documentation/ ... s-sem-book
You find direct, indirect and total effects in you bootstrapping output.
The sample mean in bootstrapping is the average coefficient over all bootstrapping runs. It indicates wether there exists some bias between original sample coefficient and sampling distribution. If the bias is large it is better to use bias-corrected confidence intervals for assessing the significance of the relationship.
The PLS-SEM book would be a possible reference: https://www.smartpls.com/documentation/ ... s-sem-book
You find direct, indirect and total effects in you bootstrapping output.
Dr. Jan-Michael Becker, BI Norwegian Business School, SmartPLS Developer
Researchgate: https://www.researchgate.net/profile/Jan_Michael_Becker
GoogleScholar: http://scholar.google.de/citations?user ... AAAJ&hl=de
Researchgate: https://www.researchgate.net/profile/Jan_Michael_Becker
GoogleScholar: http://scholar.google.de/citations?user ... AAAJ&hl=de
Re: Interpreting Path Coefficients
Thanks a lot. This one aspect is still left unclear (i.e. how to interpret the path coefficient):
1. Is the path coefficient interpreted as expressing the size of a relationship between two latent constructs (e.g., X has the largest, positive relationship with Y) or the size of the effect between two latent constructs (e.g., X has the largest, positive indirect effect on Y?
Thanks again. All of your help is really appreciated.
1. Is the path coefficient interpreted as expressing the size of a relationship between two latent constructs (e.g., X has the largest, positive relationship with Y) or the size of the effect between two latent constructs (e.g., X has the largest, positive indirect effect on Y?
Thanks again. All of your help is really appreciated.
-
- SmartPLS Developer
- Posts: 1284
- Joined: Tue Mar 28, 2006 11:09 am
- Real name and title: Dr. Jan-Michael Becker
Re: Interpreting Path Coefficients
The path coefficient is interpreted like a standardized regression coefficient.
Dr. Jan-Michael Becker, BI Norwegian Business School, SmartPLS Developer
Researchgate: https://www.researchgate.net/profile/Jan_Michael_Becker
GoogleScholar: http://scholar.google.de/citations?user ... AAAJ&hl=de
Researchgate: https://www.researchgate.net/profile/Jan_Michael_Becker
GoogleScholar: http://scholar.google.de/citations?user ... AAAJ&hl=de
Re: Interpreting Path Coefficients
I'm sorry, to clarify, does this mean that it is interpreted as an R^2 value (coefficient of determination)?
-
- SmartPLS Developer
- Posts: 1284
- Joined: Tue Mar 28, 2006 11:09 am
- Real name and title: Dr. Jan-Michael Becker
Re: Interpreting Path Coefficients
no.
A path coefficient is interpreted: If X changes by one standard deviation Y changes by b standard deviations (with b beeing the path coefficient).
A path coefficient is interpreted: If X changes by one standard deviation Y changes by b standard deviations (with b beeing the path coefficient).
Dr. Jan-Michael Becker, BI Norwegian Business School, SmartPLS Developer
Researchgate: https://www.researchgate.net/profile/Jan_Michael_Becker
GoogleScholar: http://scholar.google.de/citations?user ... AAAJ&hl=de
Researchgate: https://www.researchgate.net/profile/Jan_Michael_Becker
GoogleScholar: http://scholar.google.de/citations?user ... AAAJ&hl=de
Re: Interpreting Path Coefficients
I'm sorry, to clarify once again, how is the layman going to understand this, though, when reading an article? For example, can the increase in 1 unit SD be interpreted as a sizable effect and can this effect be quantified (e.g., small, medium, large)?
Thanks again, and for your patience.
Thanks again, and for your patience.
-
- PLS Junior User
- Posts: 3
- Joined: Fri Aug 30, 2019 2:01 pm
- Real name and title: Mario Klačmer
Re: Interpreting Path Coefficients
Im reading one article and the author say that "path coefficient (beta) is 0,446 and so we can say that perceived control had a strong effect on intentions to use".
Some other betas he describes as moderate and some as small.
But how he conclude that?
What are the references values for path coefficients in PLS-SEM?
I found rules of thumb for R2 and Q2, but no for path coefficients.
Many thanks!
Some other betas he describes as moderate and some as small.
But how he conclude that?
What are the references values for path coefficients in PLS-SEM?
I found rules of thumb for R2 and Q2, but no for path coefficients.
Many thanks!
-
- SmartPLS Developer
- Posts: 1284
- Joined: Tue Mar 28, 2006 11:09 am
- Real name and title: Dr. Jan-Michael Becker
Re: Interpreting Path Coefficients
The normal PLS path coefficients are interpreted like standardized regression coefficients. Thus, they can be descriptively compared in their magnitude because they are all on the same scale. However, to make justified claims about one being larger than the other you may also want to test this using the approach from the following paper:
Rodríguez-Entrena, M., Schuberth, F., & Gelhard, C. (2018). Assessing statistical differences between parameters estimates in Partial Least Squares path modeling. Quality & Quantity, 52(1), 57-69.
Rodríguez-Entrena, M., Schuberth, F., & Gelhard, C. (2018). Assessing statistical differences between parameters estimates in Partial Least Squares path modeling. Quality & Quantity, 52(1), 57-69.
Dr. Jan-Michael Becker, BI Norwegian Business School, SmartPLS Developer
Researchgate: https://www.researchgate.net/profile/Jan_Michael_Becker
GoogleScholar: http://scholar.google.de/citations?user ... AAAJ&hl=de
Researchgate: https://www.researchgate.net/profile/Jan_Michael_Becker
GoogleScholar: http://scholar.google.de/citations?user ... AAAJ&hl=de
-
- PLS Junior User
- Posts: 8
- Joined: Mon Oct 19, 2020 2:47 pm
- Real name and title: Antonija Petrlić, MBA
Re: Interpreting Path Coefficients
Dear,
please just for advice ie. clarification. When defining hypothesis in many research I see the use of different phrases "positive effect", "positive impact", "positive influence" and "positive relationship". What is the correct phrase to use?
Is it correct to say that "variable x has a positive impact on y" or "variable x has a positive relationship with y"?
Thank you very much.
Kind regards,
Antonija
please just for advice ie. clarification. When defining hypothesis in many research I see the use of different phrases "positive effect", "positive impact", "positive influence" and "positive relationship". What is the correct phrase to use?
Is it correct to say that "variable x has a positive impact on y" or "variable x has a positive relationship with y"?
Thank you very much.
Kind regards,
Antonija