Error: "Workspace in use, choose a different one."

This forum is closed, and read-only.
Locked
Claudia Kempf
PLS Junior User
Posts: 3
Joined: Tue Mar 20, 2012 4:10 pm
Real name and title:

Error: "Workspace in use, choose a different one."

Post by Claudia Kempf »

Hi, I installed Smart PLS some days ago, it works. Now I want to open again and I allways get the Error: "Workspace in use, choose a different one." What could I do? Thank´s for helping!
Top
User avatar
Hengkov
PLS Super-Expert
Posts: 1599
Joined: Sun Apr 24, 2011 10:13 am
Real name and title: Hengky Latan
Location: AMQ, Indonesia
Contact:
Contact Hengkov

Post by Hengkov »

Hi Claudia,
Close your file works ago for open and create new file.
Good Luck.
Regards,
Hengky
Top
Tseng, Hsien-Lee
PLS Junior User
Posts: 2
Joined: Fri Jun 01, 2007 3:12 am
Real name and title:

Re: Error: "Workspace in use, choose a different one.&q

Post by Tseng, Hsien-Lee »

Claudia Kempf wrote:Hi, I installed Smart PLS some days ago, it works. Now I want to open again and I allways get the Error: "Workspace in use, choose a different one." What could I do? Thank´s for helping!

I also have this problem.
In my case, I installed PLS on 2 computer.
One is on XP and another is on Win7.
Is that the problem? Because 2 computer can not share the same [key]?
Top
ldcarte2
PLS Junior User
Posts: 4
Joined: Mon Dec 05, 2011 6:43 pm
Real name and title:

Same Problem

Post by ldcarte2 »

I am also having the same problem. I have tried to create a new workspace, but it always tells me its in use.
Lemuria Carter, Associate Professor
North Carolina A & T State University
Top
ldcarte2
PLS Junior User
Posts: 4
Joined: Mon Dec 05, 2011 6:43 pm
Real name and title:

Post by ldcarte2 »

Even after I create a new workspace I can not open SmartPLS. No mater what I call the workspace, I receive a message saying the workspace is in use. I can not open SmartPLS at all, because I can't get past this step. Any ideas?
Lemuria Carter, Associate Professor
North Carolina A & T State University
Top
Claudia Kempf
PLS Junior User
Posts: 3
Joined: Tue Mar 20, 2012 4:10 pm
Real name and title:

Post by Claudia Kempf »

I solved the problem ;-)
It works on my computer when I write - Workspace: C:\SmartPLS2\workspace

I hope this could be a solution also for your problems!
With best regards from Leipzig!
Top
Claudia Kempf
PLS Junior User
Posts: 3
Joined: Tue Mar 20, 2012 4:10 pm
Real name and title:

Post by Claudia Kempf »

Hengkov wrote:Hi Claudia,
Close your file works ago for open and create new file.
Good Luck.
Regards,
Hengky
Thanks for your help, but unfortunatly it didn´t work.
Top
Tseng, Hsien-Lee
PLS Junior User
Posts: 2
Joined: Fri Jun 01, 2007 3:12 am
Real name and title:

Post by Tseng, Hsien-Lee »

Claudia Kempf wrote:
Hengkov wrote:Hi Claudia,
Close your file works ago for open and create new file.
Good Luck.
Regards,
Hengky
Thanks for your help, but unfortunatly it didn´t work.

amazing! It works!! Thank you~
Top
iRose
PLS User
Posts: 13
Joined: Sat Mar 05, 2011 2:36 am
Real name and title:

Thanks!

Post by iRose »

Claudia,

Thank you very much! Your information really helps!
Top
jujohama
PLS Junior User
Posts: 3
Joined: Mon Apr 02, 2012 9:57 am
Real name and title:

Post by jujohama »

Hey,

You may want to run SmartPLS "as administrator". Right-click the shortcut and select "run as administrator". "Program Files" folder might be write-protected.
Top
ivan_hartas
PLS Junior User
Posts: 1
Joined: Fri Jun 08, 2012 3:43 pm
Real name and title:

Post by ivan_hartas »

jujohama wrote:Hey,

You may want to run SmartPLS "as administrator". Right-click the shortcut and select "run as administrator". "Program Files" folder might be write-protected.
It works!! Thank you very much.
Top
Locked

Return to “SmartPLS 2 - FAQ”